[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Printing Counters



Permanent spray mount works great.

David O. Miller
Miller Design/Illustration
www.davidomiller.com



-----Original Message-----
From: Joe Hartley <jh@brainiac.com>
To: tft <tft@brainiac.com>
Sent: Wed, Sep 5, 2018 4:12 pm
Subject: Re: Printing Counters

On Wed, 5 Sep 2018 15:04:55 -0500
Joe Beutel <mejobo@comcast.net> wrote:

> Anyone have any know-how on printing counters that play well with classic Melee + Wizard and Microquest counters? I?m thinking about what sort of paper to use and if there?s some sort of laminating process that I should follow. I mostly care about having a similar ?heft? to original counters.

Your best bet might be to print the counters on a sheet with an adhesive
backing and attach it to an appropriately thick piece of cardboard, then
cut the pieces out with a utility knife or paper cutter with a heavy enough
blade arm.

--
======================================================================
Joe Hartley - UNIX/network Consultant - jh@brainiac.com
Without deviation from the norm, "progress" is not possible. - FZappa
=====
Post to the entire list by writing to tft@brainiac.com.
Unsubscribe by mailing to majordomo@brainiac.com with the message body
"unsubscribe tft"